|
|
Product Range |
|
Components of
U - Drain System |
|
Inspection
chambers - |
|
Following different sizes of Ultra Inspection Chamber and Manhole along with cover solution are available in the range. |
|
1. |
Ultra 250 with and without trap
provision with 110 mm inlet(s) and
outlet. (Size of the trap is 75 mm) |
| |
|
|
2. |
Ultra 315 mm with 110 mm inlet(s) and outlet isavailable in seven different flow profiles/ ....configurations. |
| |
|
|
3. |
Ultra 355 mm with 160 mm inlet(s)/ outlet in 5 different configurations. |
| |
|
|
4. |
Ultra 450 mm multiple inlet(s) with
two 110 mm inlets at 45° and two 160 mm inlets at 90°
with main inlet/outlet in 160 mm.
Ultra 450mm chamber in different flow configurations
with 200mm main inlet(s)/ outlet and 110, 160, and 200 mm
branch inlet(s). |
| |
|
|
5. |
Ultra 600 mm with
250 mm inlet(s) and outlet in six different
configurations. (Eccentric reducers in 250 x 200 and 250 x 160 mm are
available to convert
inlet(s)/outlet to required size.) |
|
|
|
|
6. |
Ultra 1000 mm manhole with 160,200, 250, 315 inlet (s) / outlet in different configurations. |
|
| |
| Ultra 250 |
|
 |
|
This unique inspection chamber of
250 x 110 mm in uPVC is featured with provision of 75 mm trap and hence
one can directly combine soil and waste lines to reduce the cost. This
is also available without trap and hence customer has choice to use this
chamber as per site requirements. This small version of inspection
chamber is recommended for small bungalows/ houses where maximum invert
depth is up to 600 mm. |
|
|
|
|
|
| |
|
Ultra 315, Ultra 355 and Ultra 450 |
Ultra
inspection chambers in different sizes comprise chamber base, riser(s)
in specially designed polypropylene/PE grade whereas cover and frame is
in uPVC. Entire assembly provides a completely sealed system up to
ground level. It offers a wide variety of flow profiles, giving you an
option for all 110-200 mm drainage lines.(A choice of different
configurations provides a comprehensive, level invert system with
excellent flow characteristics. In case of 355 mm chamber 355x315
reducer is provided to adopt 315 mm riser and frame / cover.) |
|
 |
|
| |
 |
Ultra
450 inspection chamber is designed to provide the method of collecting
110/160/200 mm drains at invert depth up to 1280 mm by the use of Ultra
450 risers. Maximum five risers are recommended. In addition to the
risers, shaft pipe in different lengths are also made available which
gives maximum invert depth 1295 mm. Concentric grooves are given on the
exterior face of the riser which acts as cutting guides and shallower
depths can be achieved by cutting the riser. |
|
|
|
|
| |
| Ultra 600 |
The
Ultra 600 inspection chamber consists of the base, corrugated shaft and
adjustable telescopic adapter which provides proper seating base for
SFRC ring and cover. Use of telescopic adapter is not mandatory. The
Ultra 600 base is available in 6 different flow configurations. All flow
configurations are provided with specially designed swivel adapter
which allows a free angular deflection of 7.5º from the center line in
each direction. |
|
 |
|
Vertically the connecting pipe can be adjusted to any required angular
gradient normally used in gravity systems. This flexibility makes it
possible to directly adjust the pipe connection in the trench. Extra
accessories are not necessary. This robust chamber is suitable for
installation depths from 0.8 to 5 meters. The shaft provides excellent
resistance to ground movement and heavy traffic loads. Ultra 600 is
suitable for 250 mm pipe and eccentric reducers are available to connect
160 mm and 200 mm pipes. Simple and reliable "insitu" connections can
easily made in the shaft to create additional connections. |
|
|
| |
| |
|
|
| |
|
|
|
|
